P12 Battery Charger - 12V DC 40A
7532
NEW
Features
Four stage, three output, dry mount design, for use in harsh environments.
- Rugged, finned aluminum case
- PreFloat™ stage prevents over charging
- Power factor corrected for efficient use of AC
- Intuitive diagnostic screens
- User defined charge profiles and customizable settings
- Provides charging for up to three battery banks
- Large, bright display
- Multi-language: English, French, German, Italian, Spanish
- Charge Coordination with Blue Sea Systems Automatic Charging Relays (ACR) controls ACR state ensuring proper float stage for each battery
- Battery Temperature Compensation - adjusts charge voltage based on battery temperature
- AC over and under voltage shut down and automatic restart
- Over and under battery temperature protection - charger will not operate if battery temperature rises above or falls below a set value
- DC over voltage and reverse polarity protection
- Surge and short circuit protection
Documents
InstallationArticles Four Stage Battery Charging With Prefloat Explained Battery Charging Explained Charge Coordination ExplainedVideosMarketing MaterialsProduct Certificates
Four Stage Battery Charging With Prefloat Explained Battery Charging Explained Charge Coordination Explained
VideosMarketing MaterialsProduct Certificates
Product Certificates
Specifications
Total Output Current | 40A |
Input AC Current | 7.5A @ 100V AC 3.75A @ 200V AC |
Maximum Output Voltage | 16V DC |
Nominal Voltage | 12V DC |
Ignition Protected | Yes |
Number of Outputs | 1 negative 3 positive |
Stud Size | M6 |
Universal AC Input Voltage | 115-230V AC |
AC Input Frequency | 45-65Hz |
Output Voltage Accuracy | 0.05V |
Typical Float Voltage | 13.5V DC |
Minimum Operating Temperature | -20° C |
Maximum Operating Temperature | 70° C |
Minimum Storage Temperature | -30° C |
Maximum Storage Temperature | 80° C |
Battery Types | AGM Flooded Lead Acid Gel TPPL (Thin Plate Pure Lead) |
Recommended for Battery Bank Sizes | 440Ah Maximum 60Ah Minimum |
Screw Terminal Torque | 10 in-lb (1.13 Nm) M3 15 in-lb (1.69 Nm) M4 |
Stud Torque | 80 in-lb (9.04 Nm) |
Height | 13.03in (330.96 mm) |
Width | 8.46in (214.88 mm) |
Depth | 3.66in (92.96 mm) |
Warranty | 5 Year |
Weight | 12.00lb (5.44 kg) |
Included
Qty | PN | Product |
1 | 1820 | Submersible Temperature Sensor |
Regulatory Specifications
Optional Accessories
7512 | Battery Charger Mounting Adapter | |
7517 | EV Battery Charger Display | |
7520 | P12 Battery Charger LED Remote |
Similar Products
Frequently Asked Questions
Q: Can I program each bank for a different battery type?
A: The P12 will only allow one battery type for the system.
Q: Why is the absorption voltage or float higher or lower than what is input on the battery charger?
A: If you have the temperature sensor installed, it is probably caused by temperature compensation. Higher voltage is required when in a colder environment and lower voltage is required in a hotter environment.
You may try to manually adjust the voltage parameters if needed.
You may try to manually adjust the voltage parameters if needed.