PN 5502 - Fuse Block Class T 225-400 Amp
- The fuse system recommended by most inverter manufacturers for high speed response to short circuits
- Clear insulating cover, satisfies ABYC/USCG requirements
- For use on systems up to 160 Volts DC
- Large 3/8"-16 stud terminals accept ring terminals for wire up to 4/0 AWG
- Large heat dissipating tin-plated copper mounting blocks
- Two # 8 accessory terminals located on each end
| Maximum Voltage |
160 Volts DC |
| Maximum Amperage |
400 Amperes DC |
| Maximum Torque |
190 in-lb (21.47 N·m) max. |
| Terminal Stud Size |
3/8"-16 (M10) |
| Mounting Holes |
Accept 1/4" (M6) Screw |
| Maximum Cable Size |
4/0 AWG |
| Fuse Mounting Blocks |
Tin-Plated Copper |
| Class T Fuses Available |
110-400 Amperes DC |
Blow Delay Curve
| PN |
Amperage |
Weight |
|
Accepts Fuse PN |
| 5007 |
110-200A |
1.40 (0.64) |
|
5112, 5113, 5114, 5115, 5116 |
| 5002 |
225-400A |
1.55 (0.70) |
|
5117, 5118, 5119, 5120, 5121 |
| 5502 |
225-400A |
1.55 (0.70) |
|
5117, 5118, 5119, 5120, 5121 |
