PN 5007 - Fuse Block Class T 110-200 Amp
- Large heat dissipating tin-plated copper mounting blocks
- Two # 8 accessory terminals located on each end
- The fuse system recommended by most inverter manufacturers for high speed response to short circuits
- Clear insulating cover, satisfies ABYC/USCG requirements
- For use on systems up to 160 Volts DC
- Large 3/8"-16 stud terminals accept ring terminals for wire up to 4/0 AWG
- Large heat dissipating tin-plated copper mounting blocks
- Two # 8 accessory terminals located on each end
5007 Discontinued
Specifications
| Maximum Voltage | 160 Volts DC |
| Maximum Amperage | 400 Amperes DC |
| Maximum Torque | 190 in-lb (21.47 N·m) max. |
| Terminal Stud Size | 3/8"-16 (M10) |
| Mounting Holes | Accept 1/4" (M6) Screw |
| Maximum Cable Size | 4/0 AWG |
| Fuse Mounting Blocks | Tin-Plated Copper |
| Class T Fuses Available | 110-400 Amperes DC |
Blow Delay Curve
