Remote Battery Switches ML-Remote Battery Switches

ML-RBS Remote Battery Switch with Manual Control - 12V DC 500A

7700
500 Amp magnetic latching switch provides high amperage switching under load, manually or from remote locations
  • Manual override knob provides an added level of safety allowing control with or without power and offering LOCKED OFF capability for servicing
  • LED output to remotely indicate switch state - requires optional LED
  • 3∕ 8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance
  • 7∕ 8" (22 mm) stud length accepts multiple cable terminals
  • Label recesses for circuit identification
  • Silver alloy contacts provide high reliability for switching live loads
MSRP: $252.99
Where to Buy Find a TECH Installer Compare
Specifications
Control Circuit Voltage9-16V DC
Control Circuit Connection Tinned Wire
Nominal Voltage12V DC
Manual Control Yes
Coil Function Bi-Stable
Mounting#10
Amperage Operating Current0mA
Amperage Operating Current when changing state<7A (40 ms)
Terminal Stud Torque140 in-lb (15.82 Nm)
Continuous Rating 500A
Intermittent Rating 700A (5 min)
Cranking Rating 30 sec 1450A DC
Minimum Operating Temperature-10° C
Maximum Operating Temperature60° C
Cable Size to Meet Ratings2x (4/0)
Live Current Switching300A @ 12V DC
Master Control Switch CapabilityNo
Mechanical Endurance100,000 Cycles
Terminal Ring Diameter Clearance1.18in (29.97 mm)
Terminal Stud Length0.875in (22.23 mm)
Terminal Stud Size3/8" - 16 (M10)
Weight2.05lb (0.93 kg)
Included
QtyPNProduct
1 2145 SPDT Remote Control Contura Switch - (ON)-OFF-(ON)
Optional Accessories
1147 Remote Control Panel
1148 Remote Control Panel
9160 ML Series Link Bus
Meets the following Regulatory Specifications
CE Marked
Ignition Protected
IP66
ISO 8846
SAE J1171
Remote Battery Management and ACR SubSystem

Remote Battery Management and ACR SubSystem


The ML-ACR (Automatic Charging Relay) and ML-RBS (Remote Battery Switch), when paired, offer complete battery management of large battery banks with the push of a button. In addition to automatically sharing the charge from an engine’s alternator between the start and auxiliary battery, the ML-ACR control switch provides momentary battery combining to assist with starting in the event of a low engine battery. Multiple remote battery switches can be easily connected to the ML-ACR with the optional Paralleling Link Bus for a complete remote battery management Subsystem.

NoticeYou have cookies disabled. — Bluesea.com requires cookies to provide you full functionality. Many features of the site will not function until cookies are enabled. — Read Privacy Policy
NoticeYou are using an outdated browser. — Bluesea.com can not guarantee 100% compatability with your browser — Upgrade your browser