PN 7600 - CL-Series BatteryLink™ Automatic Charging Relay (Current Limiting) with Overcurrent Protection
CL-Series BatteryLink™ Automatic Charging Relay (Current Limiting) with Overcurrent Protection
-
DISCONTINUED PRODUCT
- Automatically combines battery banks during the charging cycle and isolates under discharge
- Limits current flow allowing smaller wire size
- Adjustable high voltage disconnect
- Adjustable low voltage disconnect and combine voltages
- Activates from any charging source—alternators, battery chargers, or solar panels
- Senses charge voltages on up to two battery banks
- Ignition protected—safe for installation aboard gasoline powered boats
- Noise free circuitry will not interfere with other devices
- Low current draw when closed: <0.2A
Note: 7600 is replaced by 7610
Specifications
| Input Voltage | 9-16 Volts DC |
| Weight Lb (Kg) | 0.85 (0.39) |
| Voltage Rating | 16 Volts DC for 12 Volts DC Nominal Systems |
| Current Limiting | 60A at 25C ambient |
| Contact Form | SPST-NO |
| Agency Standards | Meets SAE J1171 external ignition protection requirements |
| Terminal Stud Size | 3/8" (M10) |
| Mechanical Life | 1.000.000 Cycles |
Certifications & Agency Standards
Marked- Meets SAE J1171 external ignition protection requirements
Product Line
| PN | Description | Weight Lb (Kg) |
|---|---|---|
| 7600 |
CL-Series BatteryLink™ Automatic Charging Relay (Current Limiting) with Overcurrent Protection
|
0.85 (0.39) |
