SI-Series Automatic Charging Relay
SI-Series Automatic Charging Relay
- Protects sensitive electronics by temporary isolation of house loads from engine circuit during engine cranking
- Designed for 12 or 24 volt systems
- 12/24 volt auto ranging voltage input
- Hermetically sealed contacts/vaporproof
- Waterproof rated IP67—temporary immersion for 30 minutes
- Ignition protected—safe for installation aboard gasoline powered boats
- Remote LED output indicates relay state away from ACR
- Supports high-output alternators up to 120 Amperes
- Dual sensing
Specifications
| Continuous Rating | 120 Amps |
| Intermittent Rating | 210 Amps |
| Inrush Rating | 280 Amps |
| Closed Current Draw | 175mA@12 Volts 115mA@24 Volts |
| Open Current Draw | 15mA |
| Maximum Cable Size | 1/0 AWG |
| Terminal Stud Size | 3/8"-16 (accepts M10 ring terminal) |
| Maximum Torque | 140 in-lbs |
| Relay Contact Position: Combine (30 sec.) | 13.6 Volts@12 Volt 27.2 Volts@24 Volt |
| Relay Contact Position: Combine (2 min.) | 13.0 Volts@12 Volt 26.0 Volts@ 24 Volt |
| Relay Contact Position: Open Low (10 sec.) | 12.35 Volts@12 Volt 24.7 Volts@ 24 Volt |
| Relay Contact Position: Open Low (30 sec.) | 12.75 Volts@ 12 Volt 25.5 Volts@ 24 Volt |
| Relay Contact Position - Open High | 16.0 Volts@12 Volt 30.0 Volts@24 Volt |
Certifications & Agency Standards
Marked- Meets ISO 8846, ignition protection, and UL 1500 and SAE J1171 external ignition protection requirements
Product Line
| PN | Product Name |
| 7610 | 7610-SI-Series Automatic Charging Relay |
