PN 9001e - e-Series Battery Switch, Selector 4 Position
- Make-before-break contact design allows switching between battery banks without power interruption
- Ignition protected—safe for installation aboard gasoline powered boats
- Case design allows surface or rear panel mounting
- Meets American Boat and Yacht Council (ABYC) requirements for battery switches
- 3/8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance, accepts 3/8" and M10 ring terminals
- 7/8" (22.22mm) stud length to accept multiple cable terminals
- Tactile textures indicate knob position by feel only
Switches isolated battery banks to all loads or combines battery banks to all loads
Specifications
| Cranking Rating: 10 sec. | 2,000 Amps |
| Cranking Rating: 1 min. | 1,000 Amps |
| Intermittent Rating: 5 min. | 600 Amps |
| Continuous Rating | 350 Amps |
| Maximum Voltage Rating | 32 Volts DC |
| Terminal Stud Size | 3/8"-16 (M10) |
| Terminal Stud Torque | 140 in-lb (15.82 N·m) max. |
| Mounting Holes | Accept 1/4" (M6) Screw |
| Cable Size to Meet Ratings | 4/0 AWG (120mm²) |
| Cable Clearance For 4/0 AWG Cables | 1.10" (27.9mm) |
| Weight Lb (Kg) | 1.15 (0.52) |
Certifications & Agency Standards
Marked- UL Listed - UL 1107 electric power switches
- Meets American Boat and Yacht Council (ABYC) requirements
- Meets UL 1500 and SAE J1171 external ignition protection requirements
- Waterproof rated IP66—protected against powerful water jets
Product Line
| Red Switch PN | Black Switch PN | Description | Battery Combine | AFD* | |||
|---|---|---|---|---|---|---|---|
| 9003e | 9003e200 | Single Circuit ON-OFF | - | - | |||
| 9004e | 9004e200 | Single Circuit ON-OFF | - | Yes | |||
| 9001e | 9001e200 | Selector-4 Position | Yes | - | |||
| 9002e | 9002e200 | Selector-4 Position | Yes | Yes | |||
| 11001 | - | Selector-3 Position | - | Yes | |||
| 5511e | 5511e200 | Dual Circuit Plus™ | Yes | - | |||
| 5510e | 5510e200 | Dual Circuit | - | - | |||
| *Alternator Field Disconnect | |||||||
