PN 5510e200 - e-Series Battery Switch, Dual Circuit™
5510e200 Discontinued
- Ignition protected—safe for installation aboard gasoline powered boats
- Case design allows surface or rear panel mounting
- Meets American Boat and Yacht Council (ABYC) requirements for battery switches
- 3/8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance, accepts 3/8" and M10 ring terminals
- 7/8" (22.22mm) stud length to accept multiple cable terminals
- Tactile textures indicate knob position by feel only
| Cranking Rating: 10 sec. |
1,000 Amps |
| Intermittent Rating: 5 min. |
525 Amps |
| Continuous Rating |
350 Amps |
| Maximum Voltage Rating |
32 Volts DC |
| Terminal Stud Size |
3/8"-16 (M10) |
| Terminal Stud Torque |
140 in-lb (15.82 N·m) max. |
| Mounting Holes |
Accept 1/4" (M6) Screw |
| Cable Size to Meet Ratings |
4/0 AWG (120mm²) |
| Cable Size to Meet Ratings |
4/0 AWG (95mm²) |
| Cable Clearance For 4/0 AWG Cables |
1.10" (27.9mm) |
| Weight Lb (Kg) |
1.16 (0.53) |
Marked- UL Listed - UL 1107 electric power switches
- Meets American Boat and Yacht Council (ABYC) requirements
- Meets UL 1500 and SAE J1171 external ignition protection requirements
- Waterproof rated IP66—protected against powerful water jets
