CL-Series BatteryLink™ Automatic Charging Relay (Current Limiting) with Overcurrent Protection

DISCONTINUED PRODUCT
Note: 7600 is replaced by 7610

Automatically combines battery banks during the charging cycle and isolates under discharge
Limits current flow allowing smaller wire size
Adjustable high voltage disconnect
Adjustable low voltage disconnect and combine voltages
Activates from any charging source—alternators, battery chargers, or solar panels
Senses charge voltages on up to two battery banks
Ignition protected—safe for installation aboard gasoline powered boats
Noise free circuitry will not interfere with other devices
Low current draw when closed: <0.2A

Specifications

Continuous Rating	60 Amperes DC
7 Minute Rating	90 Amperes DC
2 Minute Rating	120 Amperes DC
Voltage Rating	16 Volts DC for 12 Volts DC Nominal Systems
Current Limiting	60A at 25° Ambient
Stud Terminal Size	3/8" (M10)
Contact Form	SPST-NO
Mechanical Life	1,000,000 Cycles
Coil Circuit Input Voltage	9-16 Volts DC Maximum
Automatic Operation	Combines when the higher battery has remained at the required voltage for at least 30 seconds. Disconnects when the voltage drops below the charging voltage to prevent accidental discharge of a battery bank.

PN	Description	Weight Lb (Kg)
7600	CL-Series BatteryLink™ Automatic Charging Relay (Current Limiting) with Overcurrent Protection	0.85 (0.39)